澳洲快3

济南中纤板业供应站
联系我们 CONTACT US
联系我们


济南中纤板业供应站

联系人:张经理

手机:13808922490

座机:0531-88969639

邮箱:1909852022@qq.com

地址:山东省济南市历山北路北口(佳园市场,南A8区9号)

技术服务您现在的位置:澳洲快3 > 澳洲快3中心 > 技术服务 >

密度板底漆滚涂法施工

来源:admin发布时间:2017-10-27 14:17:01

关于密度板底漆滚涂法施工是怎么样的呢?接下来我们就一起来看一下吧。
About density board, primer, roll coating method construction? Let's take a look at it together.
施工工具——滚筒
Construction tools - drum
济南密度板厂家http://tsgjs8s.com/滚涂前的准备
Preparation before roll coating
1) 清除基层上的异物
1) remove foreign bodies on the base
2) 密度板底漆不用加水即可施工,如果需要涂料可加约体积量的10% 清水稀释并搅匀。
2) density board primer without adding water to the construction, if you need to add about 10% of the volume of paint can be diluted water.
程序及要求
Procedures and requirements
用羊毛滚洞将水性底漆采用交叉滚涂方法均匀滚刷两遍。
Roll out the water primer with a cross roll coating method, and roll it two times evenly.
厚度:30微米0.15KG/㎡

济南密度板

Thickness: 30 m 0.15KG/ M
科技密度板的七大优势
Seven advantages of technology density board
1.密度板内部结构均匀,密度适中,尺寸稳定性好,变形小。
1. MDF internal structure of uniform, moderate density, good dimensional stability, small deformation.
2.中密度板静曲强度、内结合强度、弹性模量、板面和板边握螺钉力等物理力学性能均优于刨花板。
2., the mechanical properties of the MDF, such as the flexural strength, the internal bond strength, the elastic modulus, the surface and the edge holding screw force, are better than the particleboard.
3.密度板的表面平整光滑,便于二次加工,可粘贴旋切单板、刨切薄木、油漆纸、浸渍纸,也可直接进行油漆和印刷装饰。
The surface of the 3. density board is smooth and easy to be processed for two times. The rotary cutting veneer, cutting veneer, paint paper and impregnated paper can be pasted, and the painting and printing decoration can also be directly carried out.
4.中密度纤维板幅面较大,板厚也可在2.5~35mm范围内变化,可根据不同用途组织生产。
4., medium density fiberboard larger format, plate thickness can also change in the range of 2.5 to 35mm, can be organized according to different uses.
5.密度板的机械加工性能好,锯截、钻孔、开榫、铣槽、砂光等加工性能类似木材,有的甚至优于木材。
5. density board of mechanical processing performance, sawing, drilling, opening, milling, groove, sanding and other processing properties similar to wood, and some even better than wood.
6.中密度板容易雕刻及铣成各种型面、形状的家具零部件,加工成的异形边可不封边而直接进行油漆等涂饰处理。
6., MDF easy to engrave and milling into various types of surface, shape of furniture parts, processed into irregular edge can be without edge, and direct painting and finishing.
7.可在中密度纤维板生产过程中加入防水剂、防火剂、防腐剂等化学药剂,生产特种用途的中密度纤维板。
7., in the MDF production process, add waterproof agents, fire retardants, preservatives and other chemicals, production of special purpose mdf.

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

澳洲快3鲁公网安备 37011202000779号

福利三分彩投注澳洲快3 台湾宾果开奖网 北京pk10 北京pk10官网开奖 PK10 快乐时时彩开奖直播网 澳洲快3三分PC蛋蛋开奖直播走势图 PK10牛牛投注平台 梦想彩票站开奖网 幸福彩开奖网 幸运飞艇投注网站 广东11选五开奖结果 三分快乐十分开奖网 跑马历史记录 SG飞艇玩法规则网